Northern Colorado · Weld County
Firestone epoxy floors.
We coat garage and shop floors across Firestone, right off I-25. Full-flake, metallic, quartz and solid-color coatings for garages, shops, basements and businesses in Firestone, every one starting with diamond-ground prep.
- Free on-site estimates
- Diamond-ground prep
- Northern Colorado & Denver
- Garages · Shops · Commercial
01Garages in Firestone
What Firestone floors look like.
Firestone is mostly newer subdivisions on both sides of I-25, with attached two- and three-car garages as the standard. Many of these homes are young enough that the garage slab has never been sealed.
That makes Firestone floors good candidates for coating: minimal repair, a fast grind, and a finished floor that's protected before winters can do much damage.
Whatever the floor, the job looks the same: we diamond-grind the slab, repair cracks and pits, put down a base coat, broadcast flake or quartz (or pour metallic), and seal it with a clear topcoat. No acid etching, no roll-on kits.
02Why coat it
Built for Firestone winters.
Winter traffic on I-25 and the local roads means plenty of deicer and slush coming home. Left on bare concrete, that water soaks in and freeze-thaw slowly wears away the surface.
Three things wear out Colorado garage floors, and a properly installed coating handles all three:
- 1
Freeze-thaw
Bare concrete is porous. Snowmelt soaks in, freezes overnight and expands, and over a few Firestone winters that pops the surface into scaling, pits and spalled edges by the door. - 2
Mag chloride & road deicer
Colorado roads are treated with magnesium chloride and other deicers. It rides home on your tires, drips off as the car warms up and keeps eating at a bare slab. On a sealed floor it stays on top, where it rinses off. - 3
Hot-tire pickup
Tires heat up on the highway. Park a hot tire on a thin, poorly bonded coating and it can soften and lift right off with the tire. Diamond-ground prep and a real topcoat are how we prevent it.
03What fits
The right system for Firestone floors.
We'll confirm the right one for your slab at the free on-site measure.
- Full-FlakeThe standard for Firestone garages: textured, forgiving and easy to clean.$6.25–$6.50 per sq ft
- QuartzFor mudrooms and wet areas that need extra grip.$7.00–$9.00 per sq ft
- MetallicFor basements and rec rooms.$9.00–$12.00 per sq ft
Also available: Solid Color / Commercial, Concrete Grinding & Repair.
We price by the square foot, and you see the same ranges in Firestone that you'd see anywhere else we work. Here's a typical Firestone job using our current full-flake range:
3-car garage · 650 sq ft · Full-Flake
$4,063 – $4,225
Includes diamond-ground prep. Heavy crack repair or removing an old coating can add to it. Final price after a free on-site measure.
| System | Per sq ft | 2-car (450 sq ft) |
|---|---|---|
| Full-Flake$6.25–$6.50/sq ft | $2,813–$2,925 | |
| Solid Color$5.00–$6.00/sq ft | $2,250–$2,700 | |
| Quartz$7.00–$9.00/sq ft | $3,150–$4,050 | |
| Metallic$9.00–$12.00/sq ft | $4,050–$5,400 |
05Instant estimate
Firestone floor prices, instantly.
Pick your space and system and see a price range for your Firestone project now. Final price after a free on-site measure.
Your estimate · Full-Flake · 450 sq ft
Based on $6.25–$6.50 per sq ft.
Estimate only — final price after a free on-site measure.
06How it works
From our Fort Collins shop to your Firestone floor.
Firestone is about 40 to 45 minutes south of our Fort Collins shop on I-25. Call or use the instant estimate, and we'll set up a free on-site measure at a time that works for you.
- 1
Call or tap for a price
Call us or use the instant estimate. You get a real range up front.
- 2
Free on-site measure
We measure, check the slab for cracks and old coatings, and confirm your price.
- 3
Grind, repair, coat
Diamond-grind prep, crack repair, base coat, flake or finish, and a clear topcoat.
- 4
Pull back in
Once it's cured, park on a floor that cleans up with a mop and looks finished.
07Before & after
Same floor. Drag the line.
Real Iron Cross jobs, photographed before we started and after we finished. No filters, no renders.
BeforeAfter“These guys are awesome, came in, figured out what needed to be done, and knocked it out. I had a large crack on my floor, along with several smaller ones, and they are gone. The large one was 9 ft and going in several different directions, and it's gone. Great job guys!!”
- 5 out of 5 stars
“I had a great experience with Iron Cross Coatings from start to finish. The communication was clear, the prep work was done right, and the final result exceeded expectations. You can tell they take pride in their process — the floor looks clean, uniform, and professionally installed. They showed up on time, kept the workspace organized, and delivered exactly what was promised.”
Cisco Ortiz · Google
- 5 out of 5 stars
“Absolutely awesome!! Had some bad luck with my last contractor so we were a bit nervous to call but Chris went above and beyond to give us a great experience. Couldn't be happier!”
Kameron Banks · Google
- 5 out of 5 stars
“Top-notch epoxy garage floor service! CJ is a man of his word—professional, reliable, and delivers exactly what he promises. The quality of work is outstanding. Highly recommended!”
James N. · Google
- 5 out of 5 stars
“Thanks, CJ! I couldn't be happier with the results. Great communication and quality work. He made the whole process super smooth. I highly recommend his services.”
Jordan Wells · Google
- 5 out of 5 stars
“Super professional dude! Didn't hesitate to drop what he was doing and come give me an estimate. Easy guy to deal with. 10/10 would recommend!”
Michael Greatheart · Google
09FAQ
Firestone questions.
Don't see yours? Call and ask. That's what the phone's for.
How much does an epoxy garage floor cost in Firestone?
Our full-flake garage system runs about $6.25–$6.50 per sq ft. For example, a 3-car garage (about 650 sq ft) with full-flake lands around $4,063–$4,225. Slab repair can change that, so your final price comes after a free on-site measure.
Is it worth coating a newer garage floor?
Most people find it is. A coated floor is easier to clean, looks finished, and seals the concrete before road salt and freeze-thaw start pitting it.
Do you work in Firestone?
Yes. Firestone is part of our regular area along I-25. Call 970-599-1898 to set up a free on-site measure.
How far is Firestone from your shop?
Firestone is about 40 to 45 minutes south of our Fort Collins shop on I-25. Call 970-599-1898 and we'll set up a free on-site measure at a time that works for you; Saturdays are by appointment.
Every system we install in Firestone
10Service area
Fort Collins to Denver.
Based in Fort Collins (80525). We install across Northern Colorado and the Denver metro.
- Mon – Fri
- 7:30am – 5:00pm
- Saturday
- By appointment
- Sunday
- Closed
Northern Colorado
Free estimate
Firestone, let's
talk floors.
Fastest way to a price is a phone call. Rather type? Send the form and we will call you back.
Call 970-599-1898Mon–Fri 7:30am–5:00pm · Sat by appointment