Commercial · Fort Collins & Denver
Non-slip commercial floors
Slip-resistant coatings for retail, warehouses, locker rooms, wash bays and ramps: safer underfoot and easy to keep clean.
01Overview
Non-slip commercial floors, done right.
Good for
- Retail and showrooms
- Warehouses and loading areas
- Locker rooms and restrooms
- Wash bays and ramps
A slick floor is a liability. Wet entries, wash bays, locker rooms and ramps are where people go down. A textured coating gives your customers and crew grip while keeping the floor sealed and easy to clean.
We build slip resistance into the system: quartz aggregate for the heaviest grip, full-flake for a textured, durable finish, or an anti-slip additive in the topcoat of a solid-color floor. The texture is set to the space, aggressive where it's wet and smoother where carts and pallet jacks roll.
For warehouses and shops, a bright solid-color floor also makes the space lighter and lets you mark aisles, walkways and work zones.
We'll plan the work around your business hours and give you cure times up front, so you know when the floor is back in service.
- GripTexture built into the system, set to how wet the area gets.
- SealedA seamless surface that keeps water and grime out of the concrete.
- Bright and markedSolid colors brighten the space and take aisle and zone markings.
- Scheduled around youWe plan the work around your hours.
02The process
How we do it.
- 1
Walkthrough
We look at traffic, moisture and equipment and recommend a system and texture. - 2
Grind and repair the concrete
We diamond-grind the slab so the coating bonds into the concrete, then fill cracks, pits and low spots and grind them flush. Good prep is what keeps a floor from peeling. - 3
Base coat
A base coat in the color you pick. - 4
Texture
Quartz or flake broadcast, or anti-slip additive, depending on the area. - 5
Topcoat
A durable topcoat locks in the texture and makes the floor easy to clean.
03Systems
What we'd recommend.
04Instant estimate
Price your non-slip commercial floors.
No email wall, no waiting for a callback to hear a number. Pick your space and system and see a real price range now.
Your estimate · Quartz · 450 sq ft
Based on $7.00–$9.00 per sq ft.
Estimate only — final price after a free on-site measure.
FAQ
Non-slip commercial floors questions.
Don't see yours? Call and ask. That's what the phone's for.
How do you make an epoxy floor non-slip?
By building texture into the system: quartz or flake broadcast, or an anti-slip additive in the topcoat. We set the amount of texture to how wet and busy each area is.
Will a textured floor be hard to clean?
More texture means more grip but a little more scrubbing. We balance the two for each area, and the floor stays sealed and seamless either way.
What does a non-slip commercial floor cost?
Solid color runs about $5–$6 per sq ft, full-flake about $6.25–$6.50 and quartz about $7–$9, including diamond-ground prep. The final price comes after a free walkthrough.
“These guys are awesome, came in, figured out what needed to be done, and knocked it out. I had a large crack on my floor, along with several smaller ones, and they are gone. The large one was 9 ft and going in several different directions, and it's gone. Great job guys!!”
- 5 out of 5 stars
“I had a great experience with Iron Cross Coatings from start to finish. The communication was clear, the prep work was done right, and the final result exceeded expectations. You can tell they take pride in their process — the floor looks clean, uniform, and professionally installed. They showed up on time, kept the workspace organized, and delivered exactly what was promised.”
Cisco Ortiz · Google
- 5 out of 5 stars
“Absolutely awesome!! Had some bad luck with my last contractor so we were a bit nervous to call but Chris went above and beyond to give us a great experience. Couldn't be happier!”
Kameron Banks · Google
- 5 out of 5 stars
“Top-notch epoxy garage floor service! CJ is a man of his word—professional, reliable, and delivers exactly what he promises. The quality of work is outstanding. Highly recommended!”
James N. · Google
- 5 out of 5 stars
“Thanks, CJ! I couldn't be happier with the results. Great communication and quality work. He made the whole process super smooth. I highly recommend his services.”
Jordan Wells · Google
- 5 out of 5 stars
“Super professional dude! Didn't hesitate to drop what he was doing and come give me an estimate. Easy guy to deal with. 10/10 would recommend!”
Michael Greatheart · Google
More spaces we coat
Home interior floorsKitchens, living rooms, home offices and entryways on a concrete slab.from $9.00/sq ft
Epoxy countertopsMetallic epoxy kitchen counters, islands, bars and vanities.Priced per project- Basement floorsFinished basements, rec rooms, home gyms and bars.from $6.25/sq ft
- Commercial kitchensRestaurants, breweries, prep and dish areas.from $7.00/sq ft
We work across Northern Colorado and the Denver metro, including Fort Collins, Loveland, Windsor, Greeley, Longmont, Timnath and the rest of our service area.
Free estimate
Tell us about
your space.
Fastest way to a price is a phone call. Rather type? Send the form and we will call you back.
Call 970-599-1898Mon–Fri 7:30am–5:00pm · Sat by appointment